Overview
The GS-530 is the longest model in the GS series, offering 530 mm of reach for tall lecterns and deep tables without compromising stability or appearance.
It uses the same wide-range cardioid capsule, switchable high-pass filter, and low-distortion electronics as the GS-380 and GS-450.
Its slim, highly flexible dual-section gooseneck allows precise microphone positioning in conference and broadcast applications.
Technical specifications
Type
Cardioid condenser gooseneck microphone
Length
530 mm
Applications
Quality sound reinforcement, professional recording, television, conferences, and other demanding applications
Capsule Type
Fixed-charge back plate condenser (permanently polarized)
Polar Pattern
Cardioid
Frequency Response
35 Hz – 18 kHz
High-Pass Filter
100 Hz, 18 dB/octave (switchable; flat / high-pass selector)
Sensitivity
-32 dB, 1 V @ 1 Pa, 1 kHz
Output Impedance
250 Ω (balanced, low impedance)
Maximum SPL
130 dB SPL, 1 kHz @ 1% T.H.D.
Dynamic Range (Typical)
110 dB, 1 kHz at maximum SPL
Signal-to-Noise Ratio
> 68 dB, 1 kHz @ 1 Pa
Phantom Power
DC 11–52 V
Current Consumption
≈ 5 mA (typical)
Output Connector
Integral 3-pin male XLR (XLRM)
Recommended Pickup Distance
10–20 cm from the capsule
Neck Design
Small-diameter gooseneck with an alternating dual-section design for high flexibility and a clean appearance
Switch
Flat / high-pass and silent mute/on switcher, depending on the series configuration
Included Accessories
Removable foam windscreen for wind and pop noise reduction
Color
Black
Weight
≈ 190 g
Base Compatibility
Bases TS-700/TS-700S, TS-F1, TDN1-F, FM-200, and others with 3-pin XLRF connector
Acoustic Characteristics
Cardioid pattern providing good gain before feedback · Wide, smooth response suited to voice, speech, and broadcast
Key features
- Wide-range cardioid condenser capsule with a response from 35 Hz to 18 kHz and approximately 110 dB dynamic range.
- Switchable 100 Hz high-pass filter at 18 dB/octave (flat / high-pass) to reduce low-frequency noise and structural vibrations.
- 530 mm length for optimal positioning on tall lecterns and large tables.
- Integrated 3-pin XLRM output and 11–52 V phantom power, compatible with most professional consoles and processors.
- Includes removable foam windscreen and offers good gain before feedback for conference and television environments.
Want to see this equipment working in your room?
We advise you at no cost on compatibility, installation and alternatives for your space.
Request a quote