Base microphone with Dante output TDN1
Model TDN1
Overview
The TDN1 is a base microphone Dante that allows utilizar any gooseneck condenser microphone with output XLRM directly on a network audio Dante, eliminando wired analog largo.
Is powered via PoE and offers control local or remote de gain, high-pass filter, phantom 48 V and LED status, integrating with software management and matrices digitales Relacart.
Está pensada for applications de refuerzo sound high-quality, conferences and aprendizaje a distancia in installations AV modern basadas in network.
Technical specifications
Device Type
Base de desktop microphone with output Dante network
Funcion Main
Convierte a gooseneck condenser microphone with XLRM in a microphone Dante network
Connector Input De Microfono
XLR 3-pin type XLRM (TDN1; the version TDN1-F usa XLRF)
Compatibility De Microfono
Any gooseneck condenser microphone with output balanceada and phantom power 48 V
Frequency Response
20 Hz – 20 kHz
High-pass Filter
150 Hz, 18 dB/octava (low‑cut conmutable via software)
Adjustment De Gain
Seis levels de gain seleccionables via software
Input Impedance
2.2 kΩ
Level Maximo Input
0 dBu @ +20 dB de gain
Signal-to-noise Ratio
≈ 65 dB, 1 kHz a 1 Pa
Profundidad De Bits / Sampling Frequency
24‑bit / 48 kHz audio digital Dante
DANTE Outputs
Dante interface 1 channel audio input toward network
Network Connector
RJ45
Velocidad Network
100 Mbps
Standard De Alimentacion
PoE IEEE 802.3af
Power Consumption
≈ 1.5–2.3 W
Phantom Power
48 V DC conmutable for the microphone conectado
Control Local / Remote
Modo Local (the pulsador controla only the propio channel) or Remote (controla devices Dante externos)
Functions Controlables
Gain input, low‑cut, encendido/apagado de phantom, modo of the pulsador, status of the LED
Interruptor De User
Pulsador frontal configurable (talk/mute, latching/momentary, etc.)
Indicacion Luminosa
LED rojo/verde programable for indicar status microphone or signals remotas
Software De Gestion
Compatible with software control microphones Dante Relacart RDM1.0 for configurar gain, filter, modo and phantom
Applications
Refuerzo sound high-quality, conferences, aprendizaje a distancia, control rooms, boardrooms
Dimensions
170 (L) × 120.3 (W) × 48.5 (H) mm
Weight
≈ 720 g
Requisitos De Wired
Cable CAT5/CAT6 toward switch PoE Dante
Integracion System
Can formar parte de systems Dante with matrices DAM‑1280D, mixers CONFER X, amplifiers HR‑31S and other nodos Dante
Key features
- Input XLRM 3-pin for conectar directly microphones gooseneck condenser alimentados by phantom, convirtiéndolos in nodos Dante network.
- PoE power IEEE 802.3af with consumption aproximado de 1.5–2.3 W, lo that simplifica the wired a single cable Ethernet.
- remote control of gain (seis levels), filter low‑cut a 150 Hz, phantom 48 V and LED rojo/verde via software Relacart RDM1.0 u other herramientas Dante.
- Pulsador configurable in modo Local or Remote for functions for talk/mute or disparo de eventos in other devices Dante.
- Chasis robust with base pesada and almohadillas de silicona antideslizantes that minimizan the transmission de vibraciones de the surface to the microphone.
Want to see this equipment working in your room?
We advise you at no cost on compatibility, installation and alternatives for your space.
Request a quote